LG LP1200DXR Owner's Manual - Page 11
English - not cooling
View all LG LP1200DXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English HOW TO USE USING THE CONTROLS FAN SPEED Pressing the FAN SPEED button cycles the circulation fan speed from low (F1) to medium (F2) to high (F3). The selected fan speed will be shown in the display. The function can be used in either COOL or FAN modes. When changing fan speeds, there is a brief delay before the fan motor changes speed. TEMP/TIMER L / M In COOL and DRY modes, the TEMP/TIMER L / M buttons adjust the set temperature up to 86°F or down to 60°F, in one degree increments. The temperature is in degrees Fahrenheit. It can NOT be switched to degrees Celsius. When the TIMER function is selected, use the TEMP/TIMER L / M buttons to adjust the delay time from 1 to 24 hours, in one hour increments. If you press and hold the TEMP/TIMER L / M buttons, the set temperature or time will change automatically after a few seconds. NOTE:The displayed temperature is the SET temperature, not the room temperature. In COOL or DRY mode, the thermostat in the air conditioner will run the compressor until the set temperature is reached, then cycle the compressor on and off to maintain the set temperature. TIMER 1-24 Hr When the TIMER function is selected, you can set the air conditioner to either automatically turn OFF or turn ON after a delay of up to 24 hours. The display will show 0. Use the TEMP/TIMER L / M buttons to adjust the delay time from 1 to 24 hours, in one hour increments. To set an automatic off delay, press the TIMER button while the air conditioner is running and use the TEMP/TIMER L / M buttons to adjust the delay time. The timer indicator will light. The air conditioner will automatically turn OFF after the set delay. To set an automatic on delay, press the TIMER button while the air conditioner is off and use the TEMP/TIMER L / M buttons to adjust the delay time. The timer indicator will light and the display will show the number of hours remaining until the unit is set to come on. The air conditioner will automatically turn ON after the set delay. To cancel the Timer function, set the display to "0". If you press and hold the TEMP/TIMER L / M buttons. NOTE:Do not unplug the air conditioner when using the timer function. 11