LG LP1200DXR Owner's Manual - Page 7

PARTS AND FEATURES CONTROL PANEL AND REMOTE English 1 234 5 6 78 Operation of functions is the same when using the remote or the control panel, unless otherwise stated. For detailed instructions on each function, see the following pages. 1 POWER ON/OFF Turns the air conditioner on and off. When turning on, a rising tone will sound to confirm. When turning off, a descending tone will sound. 2 AUTO CLEAN • The AUTO CLEAN function is used to remove moisture from the heat exchangers and helps prevent odor from forming. This function can be activated from the control panel only. • When FL appears on the display, press AUTO 7 CLEAN button, it will drain out the water collected in internal tank through upper drain port. 8 3 FAN SPEED Adjusts the circulation fan speed between low (F1), medium (F2), and high (F3). Power 1 Temp 6 Fan Speed 3 Timer Mode 4 Energy Auto Saver Swing 9 4 MODE Switches the air conditioner between COOL, FAN, and DRY modes. The respective indicator in the display will light to show the active mode. 5 DIGITAL DISPLAY AND INDICATORS Digital display shows the set temperature in degrees Fahrenheit, fan speed, or the selected TIMER delay. Indicators will light to show active mode and additional settings. The WATER FULL indicator will light to indicate when the internal water drain tank needs to be emptied. 6 TEMP/TIMER L / M Use these buttons to adjust the set temperature up or down, or to adjust the timer delay time. 7 TIMER 1-24 Hr Allows you to set a delay from 1 to 24 hours that will turn the air conditioner on or off automatically. 8 ENERGY SAVER Activates the ENERGY SAVER mode. In this mode, the fans will only run when the compressor is running. 9 AUTO SWING Sets the motorized air discharge to oscillate, improving air circulation in the room. This function can only be activated from the remote control. 7