LG LP1200DXR Owner's Manual - Page 12
Energy Saver, Auto Clean, Auto Swing - air conditioner manual
View all LG LP1200DXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE USING THE CONTROLS ENERGY SAVER Under normal operation, the exhaust fan cycles on and off with the compressor, and the circulation fan runs at the set speed. The ENERGY SAVER mode helps reduce power consumption by automatically turning off the circulation fan as well as the exhaust fan when the compressor is off. The air conditioner will automatically cycle both fans on and off with the compressor as needed for cooling. AUTO CLEAN • To turn the AUTO CLEAN function on, press the AUTO CLEAN button while the air conditioner is running in COOL or DRY mode. This function can only be selected from the control panel; it is not available from the remote. It must be set each time you wish to run the AUTO CLEAN function. AUTO CLEAN is used to remove moisture from the heat exchange coils. This helps prevent the formation of mildew and odors. 1 To use AUTO CLEAN: With the air conditioner running in COOL or DRY mode, press the AUTO CLEAN button. 2 The indicator will light. Press the POWER button to turn the air conditioner off. AUTO CLEAN will run the circulation and exhaust fans with the compressor off for a few minutes after the power is turned off. To cancel AUTO CLEAN, or to stop an AUTO CLEAN cycle in process, simply press the AUTO CLEAN button again. The AUTO CLEAN function will not operate if the air conditioner is already off. • WhePnowFeLr appears on the display, press AUTO CLEAN button, it will drain out the water collected in internal tank through upper drain Tepmoprt. See the Care and Cleaning section. FaAn USpTeOed SWING AUTO SWING function can only be activated with Timethr e rMeomdeote. When this function is on, the air discharge will oscillate to Energy Auto Saver Swing circulate air more evenly through the room. To turn this function off, simply press the AUTO SWING button with the remote again. This setting will stay in memory, even if the power is turned off. With AUTO SWING off, you may also manually adjust the air discharge to the desired position. It will maintain this position until the air conditioner is turned off or AUTO SWING is activated. 12