LG LP1200DXR Owner's Manual - Page 16

INSTALLATION INSTRUCTIONS INSTALLATION IN VERTICAL SLIDING WINDOWS NOTE: The window installation kit can be used with vertical sliding windows between 18" and 48" wide. Foam seal C (Adhesive type-shorter) Foam seal A (Adhesive type) Extension panel (if required) Vent Panel 1 Cut the foam seal A(adhesive type) & C(adhesive type-shorterT) iptoo Cthdee spelrlaodpoecorn espuma length, and attach it to t(htipeowadihnedsiovow-msásacsohrtoa).nd frame. 2 Insert the vent panel assembly, including extension panels, if needed, into the window opening. Extend the extension panels, if used. Type B screws Sellante de espuma A (Tipo adhesivo) Foam seal B (Non-adhesive type) Joints en Mousse C (Plus court de type adhésif) 3 Carefully lower the window. Secure the vent panel in place with 4 type B screws, plus one screw for each extension: Vent panel only: 4 type B screws Vent panel and one extension: 5 type B screws Vent panel and two extensions: 6 type B screws Two vent panels and two extensions: 9 type B screws 16 4 Cut the foam seal B(Non-adhesive type) to the window width. Stuff the foam seal B between JthoientsgelnaMssouassnedA the window to prevent a(iArdahensdiveintyspee)cts from getting into the room. Sellado con esp (tipo no adhesiv