Lenovo 9704ALU Hardware Maintenance Manual - Page 111
Remove the memory module being replaced by opening the retaining clips as shown.
UPC - 883609915025
View all Lenovo 9704ALU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "System board connectors" on page 92. 16. Go to "Completing the FRU replacement" on page 117. Replacing a memory module This procedure describes how to remove and replace a memory module. 1. Remove the computer cover. See "Removing the cover" on page 93. Note: For this procedure, it helps to lay the computer on its side. 2. Locate the memory module connectors. See "System board connectors" on page 92. 3. Remove the memory module being replaced by opening the retaining clips as shown. 4. Position the new memory module over the memory connector. Make sure the notch 1 on the memory aligns correctly with the connector key 2 on the system board. Push Chapter 9. Replacing FRUs (Types 7064, 7094, 9349, 9356, 9357, 9439, 9488, 9702, 9708, 9709, 9789, 9851, 9948) 103