Lenovo 9704ALU Hardware Maintenance Manual - Page 55
Flash the system. See Updating flashing BIOS, Diagnostics, Test and Recovery Information
UPC - 883609915025
View all Lenovo 9704ALU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Diagnostic Error Code 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure 001-025-XXX System Checksum Value error 001-026-XXX System FLASH data error 001-027-XXX System Configuration/Setup error 001-032-XXX System Device Controller failure 001-034-XXX System Device Buffer Allocation failure 001-035-XXX System Device Reset condition detected FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 41 2. Flash the system and retest. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 3. Go to "Undetermined problems" on page 67 1. Go to "Undetermined problems" on page 67 2. Flash the system and re-test 3. Replace component under function test 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 2. System board No action System board System board System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 3. System board System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 775 3. Run memory test 4. System board System board Chapter 7. Symptom-to-FRU Index 47