Lenovo A600 Lenovo IdeaCentre A600 Hardware Replacement Guide V1.0 - Page 27

Replacing the power cord or power adapter

Page 27 highlights

To replace the keyboard and mouse: 1. Before removing any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the computer. 2. Unplug all power cords from electrical outlets. 3. Locate the connector for the keyboard and mouse. Refer to "Left and right view of the computer" and "Rear view of the computer". Note: Your keyboard and mouse might be connected to the USB connector at either the side or rear of the computer. 4. Disconnect the failing keyboard or mouse cable from the computer and connect the new keyboard or mouse cable to the same connector. 5. Refer to the "Completing the installation". Replacing the power cord or power adapter Attention: Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com. To replace the power cord and power adapter: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the computer. 24 Hardware Replacement Guide 31036449_A6_HRG_EN.indd 24 2009.1.12 3:50:38 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

24
Hardware Replacement Guide
To replace the keyboard and mouse:
1.
Before removing any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices and the
computer.
2.
Unplug all power cords from electrical outlets.
3.
Locate the connector for the keyboard and mouse. Refer to “Left and right
view of the computer” and “Rear view of the computer”.
Note:
Your keyboard and mouse might be connected to the USB connector
at either the side or rear of the computer.
4.
Disconnect the failing keyboard or mouse cable from the computer and
connect the new keyboard or mouse cable to the same connector.
5.
Refer to the “Completing the installation”.
Replacing the power cord or power adapter
Attention:
Do not remove the computer cover or attempt any repair before reading the
“Important safety information” in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com.
To replace the power cord and power adapter:
1.
Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices and the
computer.
3
036449
6
HRG
24
2009
2
3:50:38 P