Lenovo ThinkCentre A52 Hardware Maintenance Manual - Page 48
Dimensions, Weight, Environment, Electrical, input, output, Airflow, Acoustical, noise-emission, - 8297
View all Lenovo ThinkCentre A52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Types 8288, 8297, 8326, 8329, 8342, and 8380 This section lists the physical specifications. Dimensions Height: 400 mm (15.7 in.) Width: 175 mm (6.9 in.) Depth: 432 mm (17.0 in.) Weight Minimum configuration: 8.17 kg (18 lb) Maximum configuration: 10.21 kg (22.5 lb) Environment Air temperature: System on: 10° to 35°C (50° to 95° F) System off: 10° to 60°C (50° to 140° F) Maximum altitude: 914 m (3000 ft) Note: The maximum altitude, 914 m (3000 ft), is the maximum altitude at which the specified air temperatures apply. At higher altitudes, the maximum air temperatures are lower than those specified. Humidity: System on: 10% to 80% System off: 10% to 90% Electrical input Input voltage: Low range: Minimum: 100 V ac Maximum: 127 V ac Input frequency: 50/60 Hz Voltage switch setting: 115 V ac High range: Minimum: 200 V ac Maximum: 240 V ac Input frequency: 50/60 Hz Voltage switch setting: 230 V ac Input kilovolt-amperes (kVA) (approximate): Minimum configuration as shipped: 0.10 kVA Maximum configuration: 0.26 kVA Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use. Heat output (approximate) in British thermal units (Btu) per hour: Minimum configuration: 246 Btu/hr (76 watts) Maximum configuration: 785 Btu/hr (230 watts) Airflow Approximately 2.45 cubic meters (66 cubic feet per minute) maximum Acoustical noise-emission values Average sound-pressure levels: At operator position: Idle: 31 dBA Operating: 35 dBA At bystander position - 1 meter (3.3 ft): Idle: 28 dBA Operating: 32 dBA Declared (upper limit) sound-power levels: Idle: 4.1 bels Operating: 4.4 bels Note: These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. 42 Hardware Maintenance Manual