Lenovo ThinkCentre Edge 62 Hardware Maintenance Manual - Page 115
microprocessor in the socket.
View all Lenovo ThinkCentre Edge 62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Figure 30. Removing the microprocessor 9. Make sure that the small handle is in the raised position and the microprocessor retainer is fully open. 10. Hold the new microprocessor and align the notches 2 on it with the alignment keys in the microprocessor socket, or align the small triangle 1 on one corner of the new microprocessor with the corresponding beveled corner of the microprocessor socket. Figure 31. Installing the microprocessor 11. Lower the new microprocessor straight down into the microprocessor socket on the system board. 12. Close the microprocessor retainer and lock it into position with the small handle to secure the new microprocessor in the socket. 13. Reinstall the heat sink assembly. See "Replacing the heat sink assembly" on page 105. 14. Reinstall the system board shield. See "Removing and reinstalling the system board shield" on page 102. 15. Go to "Completing the parts replacement" on page 125. Chapter 8. Replacing FRUs 109