Lenovo ThinkCentre Edge 62 Hardware Maintenance Manual - Page 80
X-XXX 071-01X-XXX 071-02X-XXX
View all Lenovo ThinkCentre Edge 62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port error 1. Run the Setup Utility program. 2. Flash the system. See "Flash update procedures" on page 167. 3. System board 071-03X-XXX Audio port failure 1. Speakers 2. Microphone 3. Audio card, if installed. 4. System board 071-04X-XXX Audio port failure 1. Run the Setup Utility program. 2. Audio card, if installed. 3. System board 071-195-XXX Audio port Test aborted by user Information only Restart the test, if necessary. 071-196-XXX Audio port test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 071-197-XXX Audio port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 071-198-XXX Audio port test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Go to "Undetermined problems" on page 82. 071-199-XXX Audio port test failed, cause unknown 1. See "Undetermined problems" on page 82. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Replace component under function test. 071-25X-XXX Audio port failure 1. Speakers 2. Audio card, if installed 3. System board 080-000-XXX Game Port interface Test Passed No action 080-XXX-XXX Game Port interface Error 1. Remove the game port device and re-test the system. 080-195-XXX Game Port interface Test aborted by user Information only Restart the test, if necessary. 080-196-XXX Game Port interface test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 74 ThinkCentre Edge Hardware Maintenance Manual