Lenovo ThinkCentre M58e Hardware Maintenance Manual - Page 112
Reinstall the memory modules into the same position on the new system board. See Replacing
View all Lenovo ThinkCentre M58e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
e. Lower the microprocessor retainer and then lower the lever to secure the retainer. Make sure the lever is securely locked into position. f. Follow any additional instructions included with the replacement part you received. 10. Position the new system board so that it is aligned with the mounting studs then slide it to the rear of the chassis until it is fully seated. 11. Reinstall any PCI adapters that were removed. See "Installing or replacing an adapter card" on page 116. 12. Reinstall the hard disk drive and connect the cables to the new system board. See "Replacing the hard disk drive" on page 110. 13. Reinstall the heat sink and microprocessor to the new system board. See "Replacing the microprocessor" on page 107. 14. Reinstall the memory modules into the same position on the new system board. See "Replacing a memory module" on page 100. 15. Reconnect all cables that were disconnected from the system board. See "System board connectors" on page 98. 16. Go to "Completing the FRU replacement" on page 118. 106 ThinkCentre Hardware Maintenance Manual