Lenovo ThinkCentre M58e Hardware Maintenance Manual - Page 85
Replacing a memory module, For this procedure, it helps to lay the computer on its side.
View all Lenovo ThinkCentre M58e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "System board connectors" on page 68. 16. Go to "Completing the FRU replacement" on page 95. Replacing a memory module Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This provides instructions on how to remove and replace a memory module. 1. Remove the computer cover. See "Removing the computer cover" on page 69. Note: For this procedure, it helps to lay the computer on its side. 2. Locate the memory module connectors. See "System board connectors" on page 68. 3. Open the retaining clips. If you are replacing an old memory module, open the retaining clips and remove the memory module being replaced as shown. Chapter 8. Replacing FRUs (Types 7258, 7260, 7268, 7270, 7280, 7296, 7298, 7304, 7307,7413, 7491, and 7508) 79