Lenovo ThinkPad Edge E330 Hardware Maintenance Manual - Page 63

Hard disk drive or solid-state drive, Removal steps of memory module, When installing, Attention

Get Lenovo ThinkPad Edge E330 PDF manuals and user guides View all Lenovo ThinkPad Edge E330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Removal steps of memory module 1 2 1 Note: If only one memory module is to be installed on the computer you are servicing, the memory module must be installed in the lower slot a , but not in the upper slot b . b a When installing: Insert the notched end of the memory module into the slot. Press the memory module in firmly, and pivot it until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily. 1040 Hard disk drive or solid-state drive For access, remove these FRUs in order: • "1010 Battery pack" on page 54 • "1020 Bottom cover" on page 55 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, have the user make a backup copy of all the information on it if possible. Chapter 9. Removing or replacing a FRU 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Removal steps of memory module
1
1
2
Note:
If only one memory module is to be installed on the computer you are servicing, the memory module
must be installed in the lower slot
a
, but not in the upper slot
b
.
b
a
When installing:
Insert the notched end of the memory module into the slot. Press the memory module in firmly, and pivot it
until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily.
1040 Hard disk drive or solid-state drive
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 54
•
“1020 Bottom cover” on page 55
Attention:
•
Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
•
Before removing the drive, have the user make a backup copy of all the information on it if possible.
Chapter 9
.
Removing or replacing a FRU
57