Lenovo ThinkPad Edge E330 Hardware Maintenance Manual - Page 69

When installing, Removal steps of mSATA solid-state drive, Attention, After installing the drive

Page 69 highlights

4 4 When installing: Plug the orange cable into the connector marked MAIN, and the blue cable into the connector marked AUX on the card. Removal steps of mSATA solid-state drive Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Never remove the drive while the computer is operating or in suspend mode. • After installing the drive, go to http://www.lenovo.com/support for instructions on configuring the drive. 1 Step 1 Screw (quantity) M2 × 3.5 mm, small-head, nylon-coated (1) Color Black Torque 0.181 Nm (1.85 kgfcm) Chapter 9. Removing or replacing a FRU 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

4
4
When installing:
Plug the orange cable into the connector marked
MAIN
, and the blue cable into the connector marked
AUX
on the card.
Removal steps of mSATA solid-state drive
Attention:
Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
Never remove the drive while the computer is operating or in suspend mode.
After installing the drive, go to http://www.lenovo.com/support for instructions on configuring the drive.
1
Step
Screw (quantity)
Color
Torque
1
M2 × 3.5 mm, small-head, nylon-coated (1)
Black
0.181 Nm
(1.85 kgfcm)
Chapter 9
.
Removing or replacing a FRU
63