Lenovo ThinkPad Edge E425 Hardware Maintenance Manual - Page 83
Make sure that the connector is attached firmly to the system board., M2 × 6 mm, wafer-head
View all Lenovo ThinkPad Edge E425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Table 23. Removal steps of system board (continued) Step Screw (quantity) 1 M2 × 6 mm, wafer-head, nylon-coated (1) Color Black Torque 0.181 Nm (1.85 kgfcm) 3 2 2 4 Step 2 Screw (quantity) M2 × 6 mm, wafer-head, nylon-coated (2) Color Black When installing: Make sure that the connector is attached firmly to the system board. Torque 0.181 Nm (1.85 kgfcm) 5 When installing: • Make sure that the cables are attached to the cable guides firmly. Chapter 8. Removing and replacing a FRU 77
Table 23. Removal steps of system board (continued)
Step
Screw (quantity)
Color
Torque
1
M2 × 6 mm, wafer-head, nylon-coated (1)
Black
0.181 Nm
(1.85 kgfcm)
2
2
4
3
Step
Screw (quantity)
Color
Torque
2
M2 × 6 mm, wafer-head, nylon-coated (2)
Black
0.181 Nm
(1.85 kgfcm)
When installing:
Make sure that the connector is attached firmly to the system board.
5
When installing:
•
Make sure that the cables are attached to the cable guides firmly.
Chapter 8
.
Removing and replacing a FRU
77