Lenovo ThinkPad X200 Hardware Maintenance Manual - Page 111
Screw cap, Screw quantity, Color, Torque, When installing
View all Lenovo ThinkPad X200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Table 30. Removal steps of LCD front bezel for touch panel LCD model or direct-bonding glass LCD model (continued) Step 1 2 Screw cap Screw (quantity) M2.5 × 8 mm, wafer-head, nylon-coated (9) M2 × 3 mm, flat-head, nylon-coated (6) Color Black Black In step 3 , detach the claws. Then remove the LCD front bezel. Note: The LCD front bezel is secured with a double-faced adhesive tape. Torque 0.392 Nm (4 kgfcm) 0.181 Nm (1.85 kgfcm) When installing: Make sure that all the claws are attached firmly. Chapter 8. Removing and replacing a FRU 105
Table 30. Removal steps of LCD front bezel for touch panel LCD model or direct-bonding glass LCD model (continued)
Step
Screw cap
Screw (quantity)
Color
Torque
1
M2.5 × 8 mm, wafer-head, nylon-coated (9)
Black
0.392 Nm
(4 kgfcm)
2
M2 × 3 mm, flat-head, nylon-coated (6)
Black
0.181 Nm
(1.85 kgfcm)
In step
3
, detach the claws. Then remove the LCD front bezel.
Note:
The LCD front bezel is secured with a double-faced adhesive tape.
When installing:
Make sure that all the claws are attached firmly.
Chapter 8
.
Removing and replacing a FRU
105