Lenovo ThinkServer Storage SA120 (English) User Guide and Hardware Maintenance - Page 29
Drive-status LEDs, SAS-connector-status LEDs, Rear I/O module power-status LED, Debug connector
View all Lenovo ThinkServer Storage SA120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1 SAS-connector-status LEDs Status On Blinking On Off Color Green Green Amber None Description The SAS connector is in use, but no data is being transferred. The SAS connector is active and data is being transferred. The SAS connector has potential errors. The SAS connector is not in use or is working normally. Note: When a SAS-connector-status LED indicates potential errors, check the system-status LEDs on the server that the storage array is connected to for confirmation. 2 Rear I/O module power-status LED Status On Off Description The rear I/O module is turned on. The rear I/O module is turned off. 3 Rear I/O module status LED Status On Off Description The rear I/O module has potential errors. The rear I/O module is working normally. 4 Debug connector Use the debug connector to update the firmware of the storage array and diagnose problems. See Chapter 5 "Updating the firmware" on page 29 and "Using the command line interface" on page 59. 5 SAS-out connector Use the SAS-out connector to connect your storage array to another storage array in cascading mode. See "Connecting the storage arrays" on page 19. 6 SAS-in connector Use the SAS-in connector to connect your storage array to a server or another storage array. See "Connecting the storage arrays" on page 19. Drive-status LEDs Each drive has two status LEDs on the front. Figure 10. Status LEDs on 3.5-inch drives Chapter 2. Product overview 17