Lenovo ThinkServer Storage SA120 (English) User Guide and Hardware Maintenance - Page 49
Dooneofthefollowing, Removing the drive from the drive tray
View all Lenovo ThinkServer Storage SA120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Note: Do not touch the circuit board on the drive. 4. Do one of the following: • If you are replacing a drive, remove the four screws to remove the failing drive from the drive tray. Figure 22. Removing the drive from the drive tray • If you are installing a drive, go to the next step. 5. Align the holes in the drive tray with the corresponding ones on the new drive. Then, install the four screws to secure the drive to the drive tray. Figure 23. Installing the drive to the drive tray 6. Slide the assembled drive and tray into the drive bay from the front until the assembly snaps into position and then completely close the handle. Chapter 6. Installing, removing, or replacing hardware 37
Note:
Donottouchthecircuitboardonthedrive.
4.Dooneofthefollowing:
•Ifyouarereplacingadrive,removethefourscrewstoremovethefailingdrivefromthedrivetray.
Figure 22. Removing the drive from the drive tray
•Ifyouareinstallingadrive,gotothenextstep.
5.Aligntheholesinthedrivetraywiththecorrespondingonesonthenewdrive.Then,installthefour
screwstosecurethedrivetothedrivetray.
Figure 23. Installing the drive to the drive tray
6.Slidetheassembleddriveandtrayintothedrivebayfromthefrontuntiltheassemblysnapsinto
positionandthencompletelyclosethehandle.
Chapter6
.
Installing,removing,orreplacinghardware
37