Lexmark 13P0245 User's Guide - Page 63
Removing an option card, Removing a hard disk, Coax/Twinax Adapter, or USB/Parallel Interface Card.
UPC - 734646245180
View all Lexmark 13P0245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removing an option card Complete the following steps to remove an internal print server, Tri-Port Adapter, Infrared Adapter, Coax/Twinax Adapter, or USB/Parallel Interface Card. WARNING: Option cards are easily damaged by static electricity. Touch something metal on the printer before you touch an option card. 1 Remove the system board access cover. See Accessing the printer system board. 2 Locate the option card. 3 Remove the screw that secures the card to the system board connector slot. 4 Gently pull the card out of the connector. 5 If you saved the metal plate that covers the connector slot and you do not plan to insert another card, attach the plate: a Slide the clip side of the plate in first, making sure the clip end covers the groove on the system board. b Use the screw to secure the other end of the metal plate to the system board. 6 Place the card in its original packaging, or wrap the card in paper and store it in a box. 7 Replace the system board access cover. See Reinstalling the system board access cover. Removing a hard disk Complete the following steps to remove a hard disk. If an option card has been installed, you must remove it before removing the firmware card. See Removing an option card. WARNING: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. 1 Remove the system board access cover. See Accessing the printer system board. 2 Locate the hard disk. 61