Lexmark 13P0245 User's Guide - Page 96
Ready, ReadyHex, Reattach <device
UPC - 734646245180
View all Lexmark 13P0245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Ready What this message means: The printer is ready to receive and process print jobs. What you can do: Send a job to print. Ready Hex What this message means: The printer is in Hex Trace mode and is ready to receive and process print jobs. What you can do: • Send a job to print. All data sent to the printer is printed in hexadecimal and character representation. Control strings are printed, not executed. • Turn the printer off and then on to exit Hex Trace mode and return to Ready status. Reattach What this message means: The specified device is either not fully connected to the printer or is experiencing a hardware failure. What you can do: • Reestablish communication by removing the specified device and reattaching it to the printer. • Press Go to clear the message and continue printing without using the device. • In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. See also: Calling for service 94