Lexmark 23B0225 Setup Guide - Page 29

Loading the multipurpose feeder You can use the multipurpose feeder one of two ways: • Paper tray-As a paper tray, you can load paper in the feeder with the intention of leaving it in the feeder. • Manual bypass feeder-As a manual bypass feeder, you send a print job to the feeder while specifying the type and size of media from your computer. The printer then prompts you to load the appropriate paper or specialty media before it prints. Follow these instructions to load the multipurpose feeder. 1 Open the multipurpose feeder. 2 Squeeze the paper guide lever and slide the guide all the way toward the front of the printer. Note: Do not exceed the maximum stack height. Overfilling the feeder may cause jams. 3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper or specialty media. Straighten the edges of the stack on a level surface. 4 Arrange the stack of paper or specialty media correctly for the size, type, and print method you are using. 5 Place the paper or specialty media print side up along the left side of the multipurpose feeder, and then push it in as far as it will easily go. Do not force the paper or specialty media. 6 Squeeze the paper guide lever and slide the guide until it lightly touches the side of the stack. Load paper 29