Lexmark C530DN Help Menu Pages - Page 2

Color quality guide Page 2 of 34 Menu item Enhance Fine Lines Color Saver RGB Brightness RGB Contrast RGB Saturation Color Balance Œ • Cyan • Magenta • Yellow • Black • Reset Defaults Description Settings Enables a print mode preferable for files such as architectural On drawings, maps, electrical circuit diagrams, and flow charts Off Notes: • To set Enhance Fine Lines from the software program with a document open (applicable to Windows users), click File Œ Print, and then click Properties, Preferences, Options, or Setup. • To set Enhance Fine Lines using the Embedded Web Server, type the network printer IP address in a browser window. Reduces the amount of toner used for graphics and images. On The amount of toner used for text is not reduced. Off Notes: • Off is the default setting. • On overrides Toner Darkness settings. • Color Saver is not supported in PPDS, and only partially supported by the PCL emulation printer software. Adjusts brightness in color outputs -6 to 6 Notes: • 0 is the default setting. • -6 is the maximum decrease. 6 is the maximum increase. • This does not affect files where CMYK color specifications are being used. Adjusts contrast in color outputs 0 to 5 Notes: • 0 is the default setting. • This does not affect files where CMYK color specifications are being used. Adjusts saturation in color outputs 0 to 5 Notes: • 0 is the default setting. • This does not affect files where CMYK color specifications are being used. Adjusts color in printed output by increasing or decreasing the -5 to 5 amount of toner being used for each color Note: 0 is the default setting.