Lexmark Dot Matrix Technical Reference - Page 76

Name BEL DC1 DC3 CAN NUL ESC U ESC @ ESC [K ESC K Dec Hex 7 07 17 11 19 13 24 18 0 27 85 n 00 1B 55 n 27 64 1B 40 27 91 75 1B 5B 4B 27 91 75 1B 5B 4B Description Beeper Sounds the printer beeper for approximately 1 second. Select Printer (XON) The host sends this command to signal the printer to begin printing data. Null (XOFF) Cancel Data Clears data received since the last buffer terminator. Null Set Print Direction n=0 bidirectional n=1 unidirectional Initialize Printer Clears all data stored in the printer buffer. Set Initial Condition Resets the printer to its original state. (This command is the same as ESC [K command in IBM mode. See page 32.) String Descriptor Download Command Resets the printer to user default settings after downloading the string descriptor to the printer. (This command is the same as ESC K command in IBM mode. See page 32.) Other Commands Name ESC 6 ESC 7 ESC 8 Dec 27 54 27 55 27 56 Hex 1B 36 1B 37 1B 38 ESC 9 ESC # 27 56 27 35 1B 38 1B 23 Description Printable Code Area Expansion Cancel Printable Code Area Expansion Disable Paper-out Sensor (248x only) Turns off the paper-out sensor to allow printing to the end of a paper. Disable Paper-out Sensor (248x only) Cancels ESC 8. Disable Control of MSB Disables the control of the MSB value set by ESC = or ESC >. 76 Section 4: Epson Emulation Mode Printer Commands