Lexmark Dot Matrix Technical Reference - Page 77

Name ESC & ESC : ESC < Dec Hex Description 27 38 0 n1 1B 26 0 n1 Define Download Characers n2 d1 data n2 d1 data 27 58 0 n 0 1B 3A 00 n Copy Normal Characters from ROM to RAM 00 27 60 1B 3C Select Left-to-Right Printing ESC = 27 61 1B 3D ESC > 27 62 1B 3E ESC W 27 87 n 1B 57 n ESC [f 27 91 102 1B 5B 66 ESC [f 27 91 112 1B 5B 70 SI SO ESC SO ESC SI DC2 DC4 ESC : 15 14 27 14 27 15 18 20 27 58 0F 0E 1B 0E 1B 0F 12 14 1B 3A Set MSBs to Zero Sets the MSBs of all data sent to the printer to 0. Set MSBs to One Sets the MSBs of all data sent to the printer to 1. Begin or End Continuous Double-Wide Printing n=0 End n=1 Begin Setup Barcode Parameter This command is the same as the ESC [f command in the IBM mode. (See page 32.) Setup Barcode Data This command is the same as the ESC [p command in the IBM mode. (See page 32.) Start 17 cpi printing Begin Double-Wide Printing by Line Select Double-Wide Select Condensed Mode Cancel Condensed Mode End Double-Wide Printing by Line Set 12 Pitch Font 77 Section 4: Epson Emulation Mode Printer Commands