Lexmark M3150 User Guide - Page 12
Additional printer setup, Installing internal options, Available internal options - firmware
View all Lexmark M3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Additional printer setup 12 Additional printer setup Installing internal options CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. Available internal options • DDR3 DIMM • Flash memory - Fonts - Firmware • Forms Barcode • Prescribe • IPDS • Printcryption • Hard disk* • Internal Solutions Ports (ISP)* - Parallel 1284‑B interface - MarkNet N8130 10/100 fiber interface - RS‑232‑C serial interface * This internal option is available only in the M3150de printer model. Accessing the controller board Access the controller board to install internal options. For M1145, see "Accessing the controller board" on page 36. For M3150, see "Accessing the controller board" on page 69. Installing an optional card CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.