Lexmark M3150 User Guide - Page 22
Installing a printer hard disk
View all Lexmark M3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Additional printer setup 22 13 Close the shield. 14 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see "Adding available options in the print driver" on page 28. Installing a printer hard disk Note: This option is available only in the M3150de printer model. CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, see "Accessing the controller board" on page 69 Note: This task requires a flat‑head screwdriver. 2 Unpack the printer hard disk. 3 Install the printer hard disk on the controller board: Warning-Potential Damage: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.