Lexmark MB2546 Users Guide PDF - Page 120
All IPv6 Router Addresses, Manually Assigned IPv6 Address
View all Lexmark MB2546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Understanding the printer menus 120 Menu item Description IPv4 Enable DHCP On* Off Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to dynamically distribute IP addressing and configuration information to clients. IPv4 Set Static IP Address IP Address Netmask Gateway Set the static IP address of your printer. Enable IPv6 On* Off Configure IPv6 in the printer. Enable DHCPv6 On Off* Run DHCPv6 in an IPv6 network. Stateless Address Autoconfiguration On* Off Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. DNS Address Specify the DNS server address, IP address, and the router for IPv6 network. Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix 0-128 (64*) All IPv6 Addresses Show all IP and router addresses used in an IPv6 network. All IPv6 Router Addresses Network Address UAA LAA Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA). Note: You can change the printer LAA manually. PCL SmartSwitch On* Off Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. PS SmartSwitch On* Off Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Note: An asterisk (*) next to a value indicates the factory default setting.