Lexmark MB2546 Users Guide PDF - Page 183
Internal solutions port does not operate correctly, Defective flash detected, Step 4
View all Lexmark MB2546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Troubleshooting 183 Action Yes Step 4 a Check if the internal option is available in the print driver. The problem is solved. Note: If necessary, manually add the internal option in the print driver to make it available for print jobs. For more information, see "Adding available options in the print driver" on page 238. b Resend the print job. Does the internal option operate correctly? No Contact customer support. Internal solutions port does not operate correctly Action Yes Step 1 Go to step 3. Print a menu settings page, and then check if the internal solutions port (ISP) appears in the Installed Features list. Is the ISP listed in the Installed Features list? Step 2 Remove, and then install the ISP. For more information, see "Installing an internal solutions port" on page 231. Note: Use a supported ISP. The problem is solved. Does the ISP operate correctly? Step 3 The problem is Check the cable and the ISP connection. solved. a Use the correct cable, and then make sure that it is securely connected to the ISP. b Check if the ISP solution interface cable is securely connected into the receptacle of the controller board. Does the ISP operate correctly? No Go to step 2. Go to step 3. Contact customer support. Defective flash detected Try one or more of the following: • Replace the defective flash memory. • From the printer control panel, select Continue to ignore the message and continue printing. • Cancel the current print job.