Lexmark T430 User's Guide - Page 134

Removing optional printer memory or firmware cards, Accessing the system board

Page 134 highlights

Supplies and maintenance information Removing optional printer memory or firmware cards These instructions can help you remove optional printer memory or firmware cards. Note: You will need a #2 Phillips screwdriver for this procedure. Accessing the system board 1 Turn the printer off and unplug the printer power cord. 2 Disconnect all cables from the back of the printer. 3 Open the upper front door and multipurpose feeder door. 4 Press the tabs on the front and top of the printer to release the side cover. Removing options 134

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174

Removing options
134
Supplies and maintenance information
Removing optional printer memory or firmware cards
These instructions can help you remove optional printer memory or firmware cards.
Note:
You will need a #2 Phillips screwdriver for this procedure.
Accessing the system board
1
Turn the printer off and unplug the printer power cord.
2
Disconnect all cables from the back of the printer.
3
Open the upper front door and multipurpose feeder door.
4
Press the tabs on the front and top of the printer to release the side cover.