Lexmark T430 User's Guide - Page 16
Envelopes, select the correct envelope size from the printer driver or from MarkVision. - manual
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Print media Envelopes You can load up to 10 envelopes in the multipurpose feeder. • Use envelopes made from 75-105 g/m2 (20-28 lb) bond paper. • Do not use envelopes that: - Have excessive curl - Are stuck together - Are damaged in any way - Contain windows, holes, perforations, cutouts, or embossing - Use metal clasps, string ties, or metal folding bars - Have postage stamps attached - Have any exposed adhesive when the flap is in the sealed position • Use envelopes that can withstand temperatures of 205°C (401°F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions. If you have any doubts about the envelopes you are considering using, check with the envelope supplier. • A combination of high humidity (over 60%) and the high printing temperatures may seal the envelopes. • Set the Paper Source to MP Feeder or Manual Env, set the paper type to Envelope, and select the correct envelope size from the printer driver or from MarkVision. • Load envelopes with the flap side down, and position the short edge nearest the return address to enter the printer first. • Adjust the right paper guide to fit the width of the envelopes. • If you are feeding self-sealing envelopes, open the rear output bin door so envelopes feed straight out the back of the printer. The rear output bin holds about 10 envelopes. • Envelopes may curl less if they exit to the rear output bin. Choosing the right print media 16