Lexmark T652DTN User's Guide - Page 156

Routine maintenance needed The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser. Securely clearing disk space The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared. Serial The printer is using a serial cable connection. The serial port is the active communication link. Some held jobs were lost Try one or more of the following: • Press the arrow buttons until Continue appears, and then press • Cancel the current print job. Staples empty or misfed to clear the message and continue printing. Load the specified staple cartridge into the finisher to clear the message and continue stapling. Staples low or missing Load the specified staple cartridge in the finisher to clear the message. Standard Bin Full Remove the stack of paper from the standard exit bin to clear the message. The printer may continue to print after this message is displayed. Make sure that the wire paper bail is installed correctly to keep printed pages from spilliing out of the bin. The number of pages supported in the output bin is dependent on what type of media is being used (e.g. card stock would print less since it is a thicker media). Submitting selection Wait for the message to clear. Too many failed panel logins The printer is now in a lockout mode because: • You attempted to log in too many times with an incorrect PIN • You attempted to log in using an incorrect password number for access to a printer feature, setting, or menu that you do not have access to. Note: There is a defined limit on the number of login attempts. Once the limit is reached, this message appears and the printer enters a lockout mode. The message remains on the printer control panel, and any further attempts to enter menus is denied until the defined time out expires. The time out duration is set by your system support person. Wait for the message to clear once the time out expires, and then: • Enter the correct PIN to access any held jobs • See your system support person if you need a password number to enter a specific printer feature, setting, or menu that is blocked from your use without the number. Understanding printer messages 156