Lexmark X543DN User Guide - Page 211
Repeating defects, Skewed print, Print is too light, Admin menu, Settings, Print menu, Quality menu
UPC - 734646099479
View all Lexmark X543DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Repeating defects REPEATING MARKS OCCUR MULTIPLE TIMES ON A PAGE Print the Print defects guide and match the defects to the marks on one of the vertical lines. Follow the instructions on the Print defects guide to determine the cause of the repeating defects. Skewed print CHECK THE PAPER GUIDES Move the guides in the tray to the correct positions for the paper size loaded. CHECK THE PAPER Make sure you are using paper that meets the printer specifications. Print is too light These are possible solutions. Try one or more of the following: CALIBRATE THE COLOR The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually: 1 From the printer control panel, press . 2 From the Admin menu, press the arrow buttons until Settings appears, and then press . 3 Press the arrow buttons until Print menu appears, and then press . 4 Press the arrow buttons until Quality menu appears, and then press . 5 Press the arrow buttons until Color Adjust appears, and then press . Calibrating appears. Troubleshooting 211