Lexmark X642E User's Guide - Page 118
Installing or removing a memory card, Installation
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Installing or removing a memory card Installation Note: MFP or printer memory cards designed for other Lexmark MFPs or printers may not work with this MFP.MFP or printer memory cards designed for other printers or MFPs may not work with this MFP. 1 Remove the system board access cover. (See Accessing the MFP system board.) Warning: MFP memory cards are easily damaged by static electricity. Touch something metal such as the MFP frame before you touch a memory card. 2 Push open the latches on both ends of the memory card connector. 3 Unpack the memory card. Avoid touching the connection points along the edge of the card. Save the packaging. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on the end of the card. Memory connector Memory card 118