Lexmark X864 User's Guide - Page 228

Troubleshooting 228 Replace jammed originals if restarting job. One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner to restart the scan job. Try one or more of the following: • Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message. • Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. • Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after the last successfully scanned page. • Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. • Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as the previous job starts. Scan Document Too Long The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message. Scanner ADF Cover Open The ADF cover is open. The message clears when the cover is closed. Scanner jam, remove all originals from the scanner Clear all original documents from the scanner. Scanner Jam Access Cover Open Close the bottom ADF door to clear the message. Serial The printer is using a serial cable connection. The serial port is the active communication link. Some held jobs were not restored Touch Continue to delete the specified job. Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible. 30 Invalid refill, change cartridge Remove the print cartridge, and then install a supported one.