Linksys RV0041 User Guide - Page 26
Setup Tab - Network, Network, LAN Setting, WAN Interface Setting, WAN Connection Type
UPC - 745883562886
View all Linksys RV0041 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
10/100/1000 4-Port VPN Router Setup Tab - Network The Setup screen contains all of the Router's basic setup functions. These functions can be set from this screen but normally don't need to be adjusted, as the Router has been designed to be used in most network settings without changing any of the default values. Some users, however, may need to enter additional information in order to connect to the Internet through an ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier. Network Host Name & Domain Name: Some ISPs may require a Host Name and Domain Name for identification, and can provide them to you. In most cases, though, leaving these fields blank will work. LAN Setting This shows the Router's MAC Address, LAN IP Address and Subnet Mask. The MAC Address is the physical address for the Router. The default value is 192.168.1.1 for IP address and 255.255.255.0 for the Subnet Mask. WAN Interface Setting Choose which port you wish to use, the WAN port (for connecting a broadband Internet connection) or the SFP port, for 10/100 networking. Only one of these ports can be used at a time. WAN Connection Type Obtain an IP Automatically If your ISP automatically assigns an IP Address, select Obtain an IP automatically. If you check the box for Use the Following DNS Server Addresses, enter a specific DNS Server IP Address. Multiple DNS IP Settings are common. In most cases, the first available DNS entry is used. Figure 5-5: Setup Tab - Network Chapter 5: Setting Up and Configuring the Router Setup Tab - Network Figure 5-6: WAN Connection Type Obtain an IP Automatically 18