Marantz AV8003 AV8003 User Manua - Page 26

3. The following screen is displayed on the monitor that is connected to the unit. MAIN MENU 1.INPUT SETUP 2.SPKR SETUP 3.SURR SETUP 4.VIDEO SETUP 5.PREFERENCE 6.ACOUSTIC EQ. 7.NETWORK LOCKED UNLOCK EXIT Press the 3 / 4 buttons to select 7. NETWORK and press the ENTER button. 4. The NETWORK SETUP screen opens. Select the item that you want to set using the 3 / 4 buttons, and change the selection using the 1 / 2 buttons. 7.NETWORK SETUP VIDEO :NTSC RESOLUTION :480/576i SCREEN SAVER:ON RETURN EXIT Note: Settings cannot be changed if the top menu of the NETWORK screen is not displayed. In such cases, a warning message is displayed on the bottom of the screen. Return the NETWORK screen to the top menu. Close the OSD menu and press the GUIDE button to return the NETWORK screen to the top menu. 7.NETWORK SETUP VIDEO :NTSC RESOLUTION :480/576i SCREEN SAVER:ON TOP PAGE OF [NETWORK] HAS TO BE SELECTED. RETURN EXIT VIDEO The color system of this unit is NTSC. RESOLUTION Use the 1 / 2 cursor buttons to select video signal resolution (pixel count) on the NETWORK PLAYER from the following options. "480/576i" Ô "480/576p" Ô "720p" Ô "1080i" Ô "AUTO" Ô "480/576i" • AUTO (default) : Sets an appropriate resolution for a television that is connected using HDMI. (If the unit is not connected to the television using HDMI, the output is 480i/576i) (If connected by converting to DVI, the output is 480p/576p) • 480/576i : The output is 480i/576i. • 480/576p : The output is 480p/576p. • 720p : The output is 720p. • 1080i : The output is 1080i. Notes: • If a monitor connected using HDMI is changed during the AUTO setting, the screen returns automatically to the top menu and the resolution is changed to one that is appropriate for the monitor. If a dialog box or the TOOL menu is displayed at this time, the resolution is changed after the dialog box or TOOL menu is closed. • Set 480i/576i if you are using VIDEO/S-VIDEO output. • If you are using a monitor connected using HDMI, and the signal is being input from the network, the video signal is output in the resolution that was set in RESOLUTION. SCREEN SAVER Use the 1 / 2 cursor buttons to select "ON" or "OFF" for the screen saver from the video signal that is output from the unit. • ON (default) : If no operation is made for 10 minutes on the NETWORK screen or SETTING screen, the screen saver is activated on the monitor. (The screen goes dark) • OFF : The screen saver is not activated even if no operation is made for 10 minutes. Note: The screen saver is not activated during photo display or video playback. ENGLISH 25 OTHERS TROUBLESHOOTING ADVANCED SETTINGS ADVANCED OPERATION BASIC OPERATION SCREEN MENUS BASIC SETTINGS CONNECTION