Marantz M-CR603 M-CR603 User Manual - English - Page 11

Connecting an antenna FM/AM • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal (vpage 16 "Tuning in Broadcast Stations"), fix the antenna with tape in a position where the noise level becomes minimal. n AM loop antenna assembly 1 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Loop antenna FM indoor antenna (Supplied) AM loop antenna (Supplied) 2 Insert the projecting part into the square hole in the stand. Black White Stand Square hole Projecting part q w e n Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. Nail, tack, etc. Standing alone Use the procedure shown upper to assemble. NOTE • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. • If the signal has noise interference, connect the ground terminal (GND) to reduce noise. • If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit. ENGLISH 7 Getting Started Connections Basic Operations Advanced Operations Information Explanation terms Troubleshooting Specifications Index