Marantz RC5200 RC5200 User Manual - Page 21
appropriate Preamp/Receiver Input source switching RC - rc 5200
View all Marantz RC5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Customizing Your RC9200/5200 device group (in Use Mode, you cannot see buttons that have no RC codes). 7 Switch back to DEL mode and delete the group if it is not a good match to your component. Repeat steps 4 through 6 until all of your remote controls have a matching device group. 8 Switch to LABEL mode to relabel each device group (see page 32-34). 9 Switch to MOVE mode to re-order your devices, so that your home panel is arranged the way you want (see page 39-40). 10 Switch to LABEL mode to personalize the greeting on your home panel (see page 32-34). 11 Still in LABEL mode, navigate to the DEVICE side of the RC9200/5200. Relabel any buttons as needed to match your existing remote controls. Check all of your devices. 12 Switch to LEARN mode and teach the RC9200/5200 all of your non-Marantz components' RC Codes (see page 28-32). 13 Switching back and forth between USE and LEARN modes, test all codes and reteach as necessary. Note Should you need to delete a command, use the DEL mode. Be very careful to NEVER delete the navigational tabs; they can only be restored with a personal computer (see page 52). 14 Switch back to LEARN mode. Teach each Device group the appropriate Preamp/Receiver Input (source switching) RC command (see page 30). 15 Congratulations, you have completed the first stage of customization! Take a well deserved break. User Guide 19