Marantz RC5200 RC5200 User Manual - Page 51
Choosing Another Channel, The Remote Control switches back to Use mode. The Remote
View all Marantz RC5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Reference 8 Repeat instructions 1 to 3 for all devices for which you want to change the RF IR settings. 9 Tap Close. The Remote Control switches back to Use mode. The Remote Control is configured to operate the devices you have set with RF signals. 10 Try out the devices for which you just changed the RF IR settings. Note It is possible that a device does not respond properly when operated with RF signals. In that case, you have to reconfigure the Remote Control to operate the device with IR signals again. Choosing Another Channel When you notice RF interference or unreliable operation you should try choosing another channel to operate your devices. Note All devices you want to operate with RF signals use the same channel. If you choose another channel for one device, the Remote Control will automatically change the channel for all devices that work with RF signals. 1 Switch back to RF IR mode. The Device menu appears. 2 Select a device that is set with RF signals. The RF IR settings appear. 3 Tap Channel. The button label turns red indicating that the button is active. 4 Press the Left and Right hard buttons to change the Channel. The Remote Control offers 4 RF Channels. Note The Channel (CH) on the RF Extender has to match the Channel on the Remote Control. 5 Tap Accept. 6 Tap Close. User Guide 49