Marantz RC5200 RC5200 User Manual - Page 32

Programming The HOME Buttons to Switch Sources

Get Marantz RC5200 PDF manuals and user guides View all Marantz RC5200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Reference Programming The HOME Buttons to Switch Sources Note When you teach a command as a Device Action, this command is automatically assigned to the corresponding button in the Home menu AND to the act of selecting the Device from the pull down Device Menu. Typically, you teach the preamp/receiver source selection or "input" command to the device action. Remember, the only way to NOT issue this command is to reveal the device menu, press and hold the LEFT hard key (now labeled NO IR) and select the device. 1 Make sure the device tab is active. The device tab is active when the name of a device is displayed. 2 Switch to Learn mode via the Mode button . 3 Point the device's original remote control to the RC9200/5200's learning eye as described above. 4 Tap the device tab to open the Device menu. 5 Touch and hold either the RC9200/5200's Left or Right button (now labeled Device) and tap the device you want to program. Even when you want to program the currently active device, you have to tap it in the Device menu. The label "device" starts flashing on the RC9200/5200 icon. 6 Press and hold the button the RC9200/5200 has to learn on your device's original remote control. If the RC9200/5200 has learned the command successfully, OK flashes on the display. You can let go of the button you're holding. If the RC9200/5200 has not learned the command successfully, you hear a short buzz and FAIL appears on the RC9200/5200 icon. 7 Program all other items you want and return to Use mode via the Mode button. User Guide 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
User Guide
30
Programming The HOME Buttons to Switch Sources
Note
When you teach a command as a Device Action, this command
is automatically assigned to the corresponding button in the
Home menu AND to the act of selecting the Device from the pull
down Device Menu. Typically, you teach the preamp/receiver
source selection or “input” command to the device action.
Remember, the only way to NOT issue this command is to
reveal the device menu, press and hold the LEFT hard key (now
labeled NO IR) and select the device.
1
Make sure the device tab is active.
The device tab is active when the name of a device is displayed.
2
Switch to Learn mode via the Mode button
.
3
Point the device’s original remote control to the RC9200/5200’s
learning eye as described above.
4
Tap the device tab to open the Device menu.
5
Touch and hold either the RC9200/5200’s Left or Right button
(now labeled Device) and tap the device you want to program.
Even when you want to program the currently active device, you
have to tap it in the Device menu.
The label “device” starts flashing on the RC9200/5200 icon.
6
Press and hold the button the RC9200/5200 has to learn on
your device’s original remote control.
If the RC9200/5200 has learned the command successfully, OK
flashes on the display. You can let go of the button you’re
holding.
If the RC9200/5200 has not learned the command successfully,
you hear a short buzz and FAIL appears on the RC9200/5200
icon.
7
Program all other items you want and return to Use mode via
the Mode button.
Reference