Marantz RC5200 RC5200 User Manual - Page 8
Getting Started, 1. Activating the RC9200/5200 - setup
View all Marantz RC5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started 1. Activating the RC9200/5200 Turning on the Display Tap the screen gently with your finger or a blunt, soft object like a pencil eraser. The display is activated and you see the Home panel. Notes · If the display stays blank or becomes black, adjust the contrast dial on the left side. · If another panel is displayed, tap the Home button . · The RC9200/5200 shuts down automatically after being left alone for a few seconds (you can adjust the time out period in the Setup panels). Using the Backlight Press the backlight button on the left side. The backlight shuts off after a few seconds to save power. Note In the settings (see page 13) you can choose to activate the backlight automatically when you turn the RC9200/5200 on. User Guide Modes The RC9200/5200 has different "modes." When you activate the RC9200/5200 for the first time, it starts up in Use mode allowing you to immediately operate your devices.In Use mode the menu bar at the bottom of the screen displays the symbol for the Mode Menu. Tap the symbol. A menu will pop up with USE as an option. If the menu bar shows another symbol, like , tap it to reveal the Mode menu and tap USE to return to normal operating mode. Note If you do not see the mode menu symbol; it has been deactivated via the Setup panel. Press and hold the center of the bottom menu bar to overide the Mode menu deactivation. 6