Maytag MAH2400AWW Owners Manual - Page 13

Troublesholoaodintg ing The washer will not start • Make sure door is firmly closed. Contr•olMst aaakeglsanucree the washer is plugged in. • Make sure the water source faucet is turned on. • Make sure to press the Start/Pause pad. Dryer• EMxhaaukset stuirpes the Child Lock is not activated, see page 6. er No water or insufficient • Turn both faucets on fully. water supply • Make sure the door is tightly closed. Notes • Make sure the washer is plugged in. • Check fuse or reset circuit breaker. • Press the Start/Pause pad. • Straighten water inlet hoses. • Disconnect hoses and clean screens. Hose filter screens may be plugged. • Open and close the door, then press the Start/Pause pad. Detergent remains in the automatic dispenser after the wash cycle is complete • Make sure the washer is running with sufficient water pressure. See Installation Instructions. • Put the detergent in the inner parts of the dispenser (away from outside edges). Washer vibrates or is too noisy • Make sure the washer is set on a level surface. If the surface is not level, adjust the washer feet to level the appliance. See Installation Instructions. • Make sure that the shipping bolts are removed. See Installation Instructions. • Make sure the washer is not touching any other object. • Make sure the laundry load is balanced. Stops • Plug cord into live electrical outlet. • Check fuse or reset circuit breaker. • Close door and push the Start/Pause pad to start the washer. For your safety, the washer will not tumble or spin unless the door is closed. • This may be a pause or soak period in the cycle. Wait briefly and it may start. • Check screens on inlet hoses at the faucets for obstructions. Clean screens periodically. Continued... 12