Maytag MAH2400AWW Owners Manual - Page 14
Start/Pause - door lock
UPC - 719881145655
View all Maytag MAH2400AWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Troublesholoaodintg ing Fills with the wrong temperature water • Turn both faucets on fully. C•ontMroalksteaasgulraencteemperature selection is correct. • Make sure hoses are connected to correct faucets. Flush water lines. • Check the water heater. It should be set to deliver a minimum 120°F (49°C) DryehroEtxwhaaustetrtaitpsthe tap. Also check water heater capacity and recovery rate. er • Disconnect hoses and clean screens. Hose filter screens may be plugged. • As the washer is filling, the water temperature may change as the automatic temperaturNeotceos ntrol feature checks incoming water temperature. This is normal. • While the washer is filling, you may notice just hot and/or just cold water going through the dispenser when cold or warm wash temperatures are selected. This is a normal function of the automatic temperature control feature as the washer determines the temperature of the water. Won't tumble • Check fuse or reset circuit breaker. • Close the door and press the Start/Pause pad. For your safety, the washer will not tumble or spin unless the door is closed. Door locked shut; will not open • Press the Start/Pause pad to stop the machine. • It may take a few moments for the door lock mechanism to disengage. Freshening your washer • See Cleaning the Interior, page 9. The washer does not drain and/or spin Load is too wet at end of cycle Leaks Water • Check fuse or reset circuit breaker. • Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service. • Close the door and press the Start/Pause pad. For your safety, the washer will not tumble or spin unless the door is closed. • Use the High spin speed. • Use high efficiency detergent to reduce over-sudsing. • Load is too small. Very small loads (one or two items) may become unbalanced and not spin out completely. • Make sure door is firmly closed. • Make sure hose connections are tight. • Make sure end of drain hose is correctly inserted and secured to drain facility. • Avoid overloading. • Use high efficiency detergent to prevent over-sudsing. For further assistance, call Maytag Customer Service toll-free at 1-800-688-9900 USA or 1-800-688-2002 Canada. U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080. 13