Motorola T605 User Manual - Page 12

1 Disconnect the vehicle's battery. 2 Remove all fuses from the power adapter cable and tape them to their respective holders. DO NOT re-insert fuses until you complete and inspect all connections. 3 On the power adapter cable, cut off the white 8-pin connector as close to the connector as possible. Be sure to leave the inline fuses on the cable along with enough spare length of wire to allow connections to be made. Dispose of the connector. 4 Connect the power adapter cable's GREEN Ignition Sense wire (3 Amp fuse) to an ignition-switched location on the fuse block. When the ignition is off, the ignition sense line should be low. 5 Connect the power adapter cable's YELLOW Entertainment Mute Wire to the vehicle's entertainment system's mute input. Note: This feature is only usable if the vehicle's entertainment system supports an active low, single wire, radio mute signal. Otherwise, the installation may require an optional relay adaptor (not included) or other customization. 6 Connect the power adaptor cable's RED positive primary lead (4 amp fuse) to a point in the vehicle's fuse box that is fused at 4 to 5 amps. The RED positive primary lead should be powered continuously. On/Off switching is performed by the GREEN Ignition Sense wire. Important: Do not connect the RED and GREEN wires together. Doing so limits the functionality of the car kit. 10 Installing the Handsfree Car Kit