NEC 20WMGX2 MultiSync 20WMG2 - Page 10
Installation Instructions - burn
UPC - 805736014716
View all NEC 20WMGX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Instructions To attach the MultiSync® LCD monitor to your computer, follow these instructions: 1. Turn off the power to your computer. Choose the appropriate cable type. (Figure 1) 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure 2). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure 3). Tighten all screws. For MAC setup: Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure 4). Tighten all screws. NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC Display Solutions of America, Inc. at (800) 632-4662. Figure 1 Figure 2 Audio input from PC DVI Connector Figure 3 USB Connector 15 Pin mini D-sub VGA Connector DVI Signal Cable Figure 4 Macintosh Cable Adapter (not included) Note: Some Macintosh systems do not require a Macintosh Cable Adapter. NOTE: PREVENTION OF SCREEN BURN Continuous on-screen display of fixed (non-moving) images, such as video games, stock market quotations, computer generated graphics and other patterns can cause permanent damage to the LCD MONITOR. Such "SCREEN BURN-IN" constitutes misuse and IS NOT COVERED by our Factory Warranty.