NEC LCDMT600 User Manual - Page 26

WARNING, Ceiling Installation

Page 26 highlights

WARNING • Only use your LCD projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the LCD projector where temperatures vary greatly. The projector must be used at temperatures between 32°F (0°C) and 104°F (40°C). • Do not expose the LCD projector to moisture, dust, or smoke. This will harm the screen image. Distance • Ensure that you have adequate ventila- 118.11" 3000mm tion around your LCD projector so heat can dissipate. Do not cover the vents on the bottom or back of the projector. 2˚ (0-7˚) Ceiling Installation 7.3˚ Installing your MultiSync MT600 LCD Projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. Do not attempt to install the projector yourself. Height 102.36" 2600 mm Screen size: 80" h3 h2 h1 Projector Control Icons Auto Start Turns the LCD projector on automatically when the main power switch is turned on. This eliminates the need to always use the "Power" button on the remote control or projector cabinet. Auto Picture When on, the "Picture" and "Fine Picture" adjustments are made automatically.** High-Contrast Increases contrast so the image from a document camera is easier to see. Speakers Turns the projector's speakers on and off. Power Management When "Power Management" is on and there is no RGB video input for five minutes or more, the projector will automatically turn itself off. Note that VIDEO and S-VIDEO sources are ignored. Display Mode This toggles your projector between resolutions of 800 x 600 (+) and 640 x 480 (-). The 800 x 600 resolution is only available for signals with a horizontal frequency of 35 kHz or higher. Press (+) if you want to compress an 800 x 600 image into the 640 x 480 display area. OPERATION h1 = 49.21" (1250 mm) : H = 29.53" (750 mm) h2 =59.06" (1500 mm) : H =19.69" (500 mm) h3 =68.90" (1750 mm) : H = 9.84" (250 mm) H = Distance between the projector bottom and the ceiling h = Distance between the screen center and the floor H Lens position 39.37" 1000 mm 47.2" 1200 mm 25 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

38
Projector Control Icons
Auto Start
Turns the LCD projector on automatically when the
main power switch is turned on. This eliminates the need to always
use the “Power” button on the remote control or projector cabinet.
Auto Picture
When on, the “Picture” and “Fine Picture” adjust-
ments are made automatically.**
High-Contrast
Increases contrast so the image from a document
camera is easier to see.
Speakers
Turns the projector’s speakers on and off.
Power Management
When “Power Management” is on and
there is no RGB video input for five minutes or more, the
projector will automatically turn itself off. Note that VIDEO and
S-VIDEO sources are ignored.
Display Mode
This toggles your projector between resolutions
of 800 x 600 (+) and 640 x 480 (-). The 800 x 600 resolution is
only available for signals with a horizontal frequency of 35 kHz
or higher. Press (+) if you want to compress an 800 x 600 image
into the 640 x 480 display area.
OPERATION
25
WARNING
Only use your LCD projector on a solid, level surface. If the projector falls to the
ground, you can be injured and the projector severely damaged.
Do not use the LCD projector where temperatures vary greatly. The projector must
be used at temperatures between 32
°
F (0
°
C) and 104
°
F (40
°
C).
Do not expose the LCD projector to moisture, dust, or smoke. This will harm the
screen image.
Ensure that you have adequate ventila-
tion around your LCD projector so heat
can dissipate. Do not cover the vents on
the bottom or back of the projector.
Ceiling Installation
Installing your MultiSync MT600 LCD
Projector on the ceiling must be done by a
qualified technician. Contact your NEC
dealer for more information.
Do not attempt to install the projector your-
self.
h3 h2 h1
Screen size: 80"
Lens position
47.2"
1200mm
Distance
Height
102.36"
2600mm
h1 = 49.21" (1250 mm) : H = 29.53" (750 mm)
h2 =59.06" (1500 mm) : H =19.69" (500
mm)
h3 =68.90" (1750
mm) : H = 9.84" (250
mm)
H = Distance between the projector
bottom and the ceiling
h = Distance between the screen center
and the floor
39.37"
1000mm
H
118.11"
3000mm
2˚ (0-7˚)
7.3˚