NEC LCDMT600 User Manual - Page 3

Command Codes (continued) No. Function Code 33 Lamp Reset 27H 34 S-VIDEO C6H 35 Brightness 60H 36 Contrast 62H 37 Color 64H 38 Tint 66H 39 Sharpness 68H 40 Audio Volume 6AH 41 Fine Picture 6EH 42 Picture Adj 70H 43 H Position 72H 44 V Position 74H Data No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Description Lamp usage hour is reset to 0 Same as remote 0 to 63 0 to 63 0 to 63 -32 to +31(E0 to 1F) 0 to 3 0 to 63 0 to 15 0 to 255 -32 to +31(E0 to 1F) -32 to +31(E0 to 1F) WARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT'S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED NEC SERVICE PERSONNEL. 61 RF Interference WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Technologies in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 2