NEC NP-PX700W-08ZL User Manual - Page 122

5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] This function is used to reduce video noise. RANDOM NR Reduces flickering random noise in an image. MOSQUITO NR Reduces mosquito noise that appears around the edges of an image during DVD playback. BLOCK NR Reduces block noise or mosaic-like patterns by selecting ON. Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE] This function allows you to select an interlaced-to-progressive conversion process for video signals. AUTO Determines an appropriate interlaced-to-progressive conversion process automatically. VIDEO Applies a normal interlaced-to-progressive conversion process. FILM Applies the automatic detection mode for telecine signals. This option is recommended for a movie picture. NOTE: This function is not available with RGB signals. Turning On or Off the 3D Dimensional Separation [3D Y/C SEPARATION] When projecting an image from a VIDEO input, set to ON to project the highest quality image. OFF Turns off the 3 dimensional separation feature. ON Turns on the 3 dimensional separation feature. NOTE: Only available for NTSC 3.58 video signals. [DETAIL ENHANCEMENT] This function enhances the contours of the image when projecting component signals. [SIGNAL TYPE] The projector automatically identifies whether the COMPUTER 1, COMPUTER 2 or COMPUTER 3* input signals are RGB or component signals to project the image. If the colors are unnatural, however, try switching the setting. * For COMPUTER 3, the computer signal and video signal can be selected at SIGNAL SELECT(COMP3). RGB Switches to the RGB input. COMPONENT Switches to the component signal input. 108