NEC NP-PX700W-08ZL User Manual - Page 161

5. Using On-Screen Menu ALERT MAIL (ADVANCED menu only) ALERT MAIL This option will notify your computer of lamp replace time or error - messages via e-mail when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. Sample of a message to be sent from the projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: NEC Projector Lamp 1 Hours Used: xxxx [H] Lamp 2 Hours Used: xxxx [H] HOST NAME DOMAIN NAME SENDER'S ADDRESS SMTP SERVER NAME RECIPIENT'S ADDRESS 1, 2, 3 TEST MAIL Type in a host name. Up to 15 alphanumeric characters Type in a domain name of the network connected to the projec- Up to 60 alphanumeric tor. characters Specify the sender's address. Up to 60 alphanumeric characters and symbols Type in the SMTP server name to be connected to the projec- Up to 60 alphanumeric tor. characters Type in your recipient's address. Up to 60 alphanumeric characters and symbols Send a test mail to check if your settings are correct. - NOTE: • If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient's Address is correctly set. • Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'S NAME] or [RECIPIENT'S ADDRESS 1-3] is selected, [TEST MAIL] is not available. • Be sure to highlight [OK] and press the ENTER button before executing [TEST MAIL]. 147