NEC NP-PX700W-08ZL User Manual - Page 226
NEC NP-PX700W-08ZL Manual
View all NEC NP-PX700W-08ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
9. Appendix ❸ Mounting the Optional Board (sold separately) CAUTION Before mounting or removing the optional board, be sure to turn off the projector, wait for the fans to stop and turn off the main power switch. Tool needed: Phillips screwdriver (plus-head) The SB-01HC board is used as an example. 1. Turn off the main power switch of the projector. 2. Loosen the two screws on the slot cover of the terminal panel. Remove the two screws and the slot cover. NOTE: Keep the two screws and the slot cover. 3. Insert the optional board into the slot. Make sure that the board is inserted into the slot in the correct orientation. Incorrect orientation may cause miscommunication between the optional board and projector. 212
212
9. Appendix
❸
Mounting the Optional Board (sold separately)
CAUTION
Beforemountingorremovingtheoptionalboard,besuretoturnofftheprojector,waitforthefanstostopandturn
offthemainpowerswitch.
Toolneeded:Phillipsscrewdriver(plus-head)
TheSB-01HCboardisusedasanexample.
1. Turnoffthemainpowerswitchoftheprojector.
2. Loosenthetwoscrewsontheslotcoveroftheterminalpanel.
Remove the two screws and the slot cover.
NOTE:Keepthetwoscrewsandtheslotcover.
3. Inserttheoptionalboardintotheslot.
Make sure that the board is inserted into the slot in the correct orientation.
Incorrectorientationmaycausemiscommunicationbetweentheoptionalboardandprojector.